Note:
If you want to make coffee again, you should turn the knob to the “
” position and
press the steam button to the higher position which is the
“ ”
position, the pump will pump
water until the ready indicator goes out
，
then turn the knob to the“
” position. The
appliance begins to pre-heat until the ready indicator (blue) is illuminated.
PRODUCING STEAM TO HEAT
LIQUIDS
The steam wand (without the frothing device) can be used to heat beverages like drinking
chocolate, and water.
Method
:
1. Remove the detachable tank and fill it with desired water, the water level should not
exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.
2. Then connect the appliance to power supply source.
3. Press the ON/OFF switch, and the heating indicator (red) is illuminated.
4.T
urn the knob to the “
” position. Make sure the steam button is on the higher position
which is the “
”
position. The pump will pump water. When there is water flowing out,
close the pump immediately, pressing down the steam button to the lower position which
is the
“
”
position and wait for a moment. The appliance begins to be heated until the
blue indicator is illuminated, to show the heating is finished.
5. Remove the frothing device from the steam wand.
6. Dip the steam wand into the liquid to be heated. Turn the knob to the “ ” position.
7. When the required temperature is reached, turn the knob to the “ ” position.
8. Press the power switch to cut off the power.
