Chapter 3
3-20
to these modes: Suspend Mode and HDD Power Down. There are three op-
tions for power management:
Min Saving
Minimum Power Management. Suspend Mode = 1 Hour,
and HDD Power Down = 15 Min.
Max Saving
Maximum Power Management. Suspend Mode = 1 Min,
and HDD Power Down = 1 Min.
User Define
Allows end users to configure each mode separately.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Video Off In Suspend
This setting determines whether the monitor will be turned off during suspend
mode. Setting options:
Yes, No
.
Suspend Type
This setting allows you to select the type of Suspend mode. Setting options:
Stop Grant
(saves the state of the entire system to disk and then powers off
the system),
PwrOn Suspend
(the CPU and core system remain powered on in
a very low-power mode).
Modem Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system. Settings are
3
,
4
,
5
,
7
,
9
,
10
,
11
and
NA
.
Suspend Mode
After the selected period of system inactivity, all devices except the CPU shut
off. Settings are
Disabled
,
1 Min
,
2 Min
,
4 Min
,
8 Min
,
12 Min
,
20 Min
,
30
Min
,
40 Min
and
1 Hour
.
