manualshive.com logo in svg

Premio Computer Apollo, User Manual

Share
Download
Premio Computer Apollo User Manual Download Page 28

iii

Edition

Sept. 2001

Copyright Notice

The material in this document is the intellectual property of 

MICRO-

STAR INTERNATIONAL

. We take every care in the preparation

of this document, but no guarantee is given as to the correctness of its
contents.  Our products are under continual improvement and we re-
serve the right to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective
owners.

Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 and OS/2 are registered trademarks of IBM Corporation.
Windows 95 and Windows NT are registered trademarks of Microsoft.
Netware is a registered trademark of Novell.
Award is a registered trademark of Award Software Inc.

Revision History

Revision

Revision History

Date

V1.0

First release

 Sept. 2001

Summary of Contents for Apollo















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands