manualshive.com logo in svg

Premio Computer Apollo, User Manual

Share
Download
Premio Computer Apollo User Manual Download Page 124

Appendix B

B-2

The mainboard is able to transform the audio connectors on the back panel
from 2-channel to 4-/6-channel.  To use the function, you need to install the C-
Media drivers.

To install C-Media drivers:

1.

Insert the companion CD into the CD-ROM drive.  The setup screen will
automatically appear.

2.

Click on 

C-Media Sound Drivers

.

3.

Follow the on-screen instructions to complete installation.

4.

Restart the system.

Installing C-Media Drivers

After installing the C-Media drivers, you can attach the speakers for 4-/6-
channel audio output. Always connect the speakers to the LINE OUT
connectors. Different connector configurations for 2-/4-/6-channel operations
are listed below:

Hardware Configuration

Note:

  For Windows NT4.0, you need to install the C-Media Sound

Drivers 

manually

.

2-Channel

4-Channel

6-Channel

MIC

LINE OUT

Line In

MIC

LINE OUT LINE OUT

LINE OUT

LINE OUT LINE OUT

When set to 4-channel
configuration, LINE IN function
DOES NOT WORK any more.

When set to 6-channel
configuration, LINE IN and MIC
functions DO NOT WORK
anymore.

In 2-channel configuration, Line
Out, Line In and MIC functions
all exist.

Summary of Contents for Apollo















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands