manualshive.com logo in svg

Premio Computer Apollo, User Manual

Share
Download
Premio Computer Apollo User Manual Download Page 95

AWARD

®

  BIOS Setup

3-19

Power Management Setup

The Power Management Setup allows you to configure you system to most
effectively save energy while operating in a manner consistent with your own
style of computer use.

ACPI Suspend Type

This item specifies the power saving modes for ACPI function. Options are:

S1/POS

The S1 sleep mode is a low power state. In this state, no
system context (CPU or chipset) is lost and hardware
maintains all system context.

S3/STR

The S3 sleep mode is a power-down state in which power
is supplied only to essential components such as main
memory and wake-capable devices and all system con-
text is saved to main memory. The information stored in
memory will be used to restore the PC to the previous
state when an “wake up” event occurs.

Power Management

This item is used to select the degree (or type) of power saving and is related

Summary of Contents for Apollo















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands