manualshive.com logo in svg

Premio Computer Apollo, User Manual

Share
Download
Premio Computer Apollo User Manual Download Page 130

C-5

USB PC to PC Networking Function

d. In “Sharing” tag, select “Share As”.
e.

Enter a name to help others recognize your sharing file or device
(optional).

f.

Select “Access Type”.  If you select “ Depend on Password”, your need
to assign an access password for this device.

g. Click “OK” button.

How to check if you have already shared your resources

Go to the resource and check if Windows had added a hand on its icon or
not.  If yes, it means you’ve successfully shared your resource and others
can access it through USB PC to PC; if not, you need to repeat the steps
described in “

How to share your files, folders, drives and printers

”

 to

complete your sharing processes.

Connecting to your existing Home or Office LAN

To connect your USB PC to PC to another existing Home of Office LAN via
USB PC to PC port, you need to install 

GeneLink

TM

 

Software Router

 in

addition to GeneLink

TM

 LAN driver.  GeneLink

TM

 Software Router is respon-

sible for handling all network packets between USB PC to PC and your
Home/Office LAN.  So only the computer that is physically connected to
both LANs needs to install GeneLink

TM

 Software Router (i.e., this computer

should install both GeneLink

TM

 LAN and one network adapter for Home/

Office LAN).  For those computers on USB PC to PC, you only need to
follow installation procedures on the manual to install GeneLink

TM

 LAN

driver.  The following procedures will show you how to install drivers to the
computer that will link both PC and your existing Home/Office LAN:

Notice: If you want to connect your GeneLink

TM

 LAN to your existing

Home/Office LAN, you should use the same protocol for the two LANs.

  For

example, if your Home/Office LAN uses TCP/IP protocol, you should also
use TCP/IP protocol for your GeneLink

TM

 LAN.  Otherwise, these two LANs

cannot communicate to each other.  The Setup Program installs TCP/IP,
NetBEUI and IPX protocols for GeneLink

TM

 LAN by default.  If your Home/

Office LAN uses other protocol, please install the same protocol for those
computers within GeneLink

TM

 LAN.

Summary of Contents for Apollo















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands