PRF
Page 2
Installation Instructions
Contact Premier Mounts with any questions:
(800) 368-9700
[email protected]
Contents
Warning Statements
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND
COMPLETELY UNDERSTOOD TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE
INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS
PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY
UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS,
DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR
IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE
PROPER SAFETY GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
At least two qualifi ed people should perform the assembly procedure. Personal injury and/or property damage can result
from dropping or mishandling the fl at panel.
If mounting to wall studs, make sure that the mounting screws are anchored into the center of the wall studs. Use of an
edge-to-edge stud fi nder is recommended.
Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are
no electrical wires in the wall. Cutting or drilling into an electrical line may cause serious personal injury.
Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cutting or drilling into a
water or gas line may cause severe property damage or personal injury.
This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious
personal injury.
Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of
impact.
Weight Capacity
Maximum fl at panel weight:
50lbs.
THE WALL STRUCTURE MUST BE CAPABLE OF HOLDING
FIVE (5) TIMES THE WEIGHT OF THE FLAT PANEL. IF NOT,
THEN THE WALL STRUCTURE MUST BE REINFORCED.
Installation Tools. ...................................................................................................................................................... 3
Parts List................................................................................................................................................................... 3
Mounting Hardware. ................................................................................................................................................. 4
Features. .................................................................................................................................................................. 5
Installing the PRF Mount. ......................................................................................................................................... 6
Single Stud Installation. ............................................................................................................................... 6
Solid Surface. .............................................................................................................................................. 7
Determining the Mounting Hardware. ....................................................................................................................... 9
Universal Spacer Installation (optional). ................................................................................................................... 9
VESA 75/100 Installation. ....................................................................................................................................... 10
Attaching the UFP-280 Adapter Plate..................................................................................................................... 11
Attaching the PRF to the Adapter Plate. ................................................................................................................. 12
Technical Specifi cations. ........................................................................................................................................ 12
Warranty. ................................................................................................................................................................ 13
