![background image](http://html1.mh-extra.com/html/premier-mounts/prf/prf_installation-instructions-manual_1596387006.webp)
PRF
Page 6
Installation Instructions
Installing the PRF Mount
Thank you for purchasing Premier Mount’s Universal Ultra-Flat Mount. Please ensure that you have all the hardware
listed on the front of the page. If any of the hardware described is missing, do not continue. Contact PREMIER
MOUNTS Customer Service at (800) 368-9700. Separate the mounting plates and choose the location for the fl at
panel
Introduction
For single wood stud installations, use the two (2)
middle mounting points found on the wall plate.
Determine the desired viewing location. Use a stud
fi nder to locate one (1) wall stud closest to the viewing
location.
Step 1
Single Stud Installation
Step 2
Step 3
Wall Stud
Electronic
Stud fi nder
1
/
8
˝
Drill
Bit
Once the stud has been located, use a pencil to mark the
center of the stud.
Drill a pilot hole at the marked location using a power drill
and a
1
/
8
˝
drill bit.
Only use
1
/
8
˝
drill bit when drilling the pilot
holes.
Single Stud Hole
Single Stud Hole
When determining viewing height, the center of
the fl at panel should be at eye level while sitting
in an upright position. When using the fl at panel
as room decoration, raise it to the point where the
bottom of the screen is at eye level while
sitting and the top is eye level when standing.