RECEIVER INSTALLATION/SERVO CONNECTIONS (CONTINUED)
11
While Spektrum and Futaba usually output their digital data
stream, it may be necessary for JR DMSS, Graupner HOTT,
and Jeti users to program the transmitter/receiver to output the
correct digital format listed on the previous page. Consult your
transmitter and receiver manuals for further details.
Bind your transmitter and receiver per your manufacturer's
instructions.
Connect the included male to male servo extension to the
receiver's data port (ex: S.Bus, SRXL etc.) and connect to servo
port 'B' on the face of the Aura. Refer to your radio
manufacturer's instructions for specific information on
appropriate serial port connections and system settings.
With the transmitter powered, power up the aircraft. Aura will
search (sweeping LEDs) and lock onto the signal. You will then
see solid orange (power and calibrated sensor) plus solid green
(valid radio source), and have control of the model.
All Other Digital Receiver Connections
1.
2.
3.
4.
Note: If you are using Futaba S.Bus, be sure to use the proper
S.Bus port in your receiver. DO NOT use the S.Bus 2 port, as it
is not supported for use with the Aura 8. Refer to your
manufacturer's instructions for proper S.Bus use.
Note: When using Spektrum SRXL to connect to the Aura,
always connect the remote receivers to the Spektrum receiver,
NOT to the Aura.
If your receiver has a working throttle port while using it's
digital connection, use it. Move the ESC (throttle) lead from
Aura Port S1 to your receiver's throttle port. Consult your
receiver and/or transmitter instruction manual for specific
details on your system.
ESC
Summary of Contents for QQ EXTRA 300G2
Page 1: ...Day Night Versions Day Night Versions G2 G2 ...
Page 2: ......
