CAUTION:
To Avoid Battery Leakage
•
Be sure to insert the batteries correctly
and always follow the toy and battery
manufacturers’instructions.
•
Do not mix old and new batteries
or alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium)
batteries. Only batteries of the same
or equivalent type recommended
should be used.
•
Always remove weak or dead batteries
from the product; do not short-circuit
supply terminals.
•
Insert batteries with correct polarity
(+/-) as shown.
Important Tips
•
2 Alkaline batteries AA (LR6) are
recommended.
•
Rechargeable batteries are not
recommended.
•
Remove rechargeable batteries from
toy before charging; they must be
charged only under adult supervision.
•
Non-rechargeable batteries must not
be recharged.
•
Keep components free of dust; do not
immerse or use in water.
•
Do not dispose of batteries in a fire;
they could leak or explode and cause
injury.
•
Remove all batteries if the toy will not
be used for a long period of time.
•
Do not put rods smaller than 2 inches
in any openings of the motor; they will
damage the motor, and cannot be
removed.
WARNING:
CHOKING HAZARD – Small Parts. Not for children under the age
of 3 years.
CAUTION:
Keep hands, face, hair and clothing away from all moving parts.
Battery Information:
R
obot
K’NEX Parts List
TIP:
Push the gray
connectors together
tightly until they
“click”.
1
2
1
3
-
Install batteries
before building model.
™
-
How to Insert
and Remove
Batteries
+
3
Summary of Contents for Robot
Page 3: ...8 9 10 1 11 1 7 1 9 1 9 11...
