Operation of the various fittings
The plastic snap buckle
consists of 2 parts - fit together
until both latch in.
Fasteners with friction buckles:
Guide the loose strap end
through the friction buckle from
the backside, insert between
the movable part and the fixed
end of the strap and pull to the
front.
Now, guide the strap end which
has been pulled to the front,
around the movable part and
reinsert to the back.
Finally, pull tightly.
Metal snap buckle: Place both
ends into each other until they
latch.
View of the closed and tightly
adjusted snap buckle of the waist
belt.
Compact snap buckle: Place
both ends into each other until
they latch.
View of the closed and tightly
adjusted snap buckle of the
waist belt.
Tighten with the buckle closed by
pulling the free strap end, loosen
only in the open condition (pull at
the buckle).
For changing the strap length:
Open the buckle, hold at right-
angles and pull at the strap end
(to tighten) or at the buckle (to
loosen).
loosen
fasten
Pass-thru buckles:
Insert the smaller frame from
the back through the larger one.
Then, pull tightly (to tighten) at
the free strap end; loosen only
in the open condition (pull at
the frame).
