This fall arrest attachment element of type
A
may be used in connection with
(1) hinged guided type fall arresters in accordance with EN 353-2
(2) guided type fall arresters in accordance with EN 353-2
(3) lanyards EN 354 with energy absorber
(4) rectractable type fall arresters EN 360
(5a) band energy absorbers EN 355
(5b) friction energy absorbers EN 355
(6) abseilingr devices EN 341, also with integrated rescue function
in accordance with EN 1496 or specific rescue devices in accordance with EN 1496.
Always observe the instructions for use for any personal protective equipment which
is used together with the Preising full body harnesses, in particular the given
minimum distances to danger areas as well as the safety instructions!
Fall arrest equipment as per EN 353-2, connectors with energy absorber as per EN
354, energy absorbers as per EN 355 and retractable type fall arresters as per EN
360 require e.g.
- defined minimum clearances below the user between the underlying danger area
- anchor points with defined position in relation to the user (e.g. above) with
instructions and restrictions e.g. regarding horizontal or inclined use.
The full arrest attachment element characterized with
A/2
consists of 2 belt loops
which must always be connected with the included karabiners as per EN 362 in order
to form a functional full arrest attachment element. This functional unit may be used
in connection with
(7) fall arrest equipment EN 353-1 – „guided-type fall arresters“
(1) hinged guided type fall arresters in accordance with EN 353-2
(2) guided type fall arresters in accordance with EN 353-2
(3) lanyards EN 354 with energy absorber
(4) rectractable type fall arresters EN 360
(5a) band energy absorbers EN 355
(5b) friction energy absorbers EN 355
(6) abseiling devices EN 341, also with integrated rescue function
in accordance with EN 1496 or respective rescue devices in accordance with EN
1496.
Always observe the instructions for use for this equipment used together with the
Preising full body harnesses, in particular the respective safety instructions.
Fall arrest equipment as per EN 353-2, connectors with energy absorber as per EN
354, energy absorbers as per EN 355 and retractable type fall arresters as per EN
360 require e.g.
- defined minimum clearances below the user
- anchor points with defined position in relation to the user (e.g. above) with
instructions and restrictions e.g. regarding horizontal or inclined use.
The integrated work positioning or restraint attachment elements without rear support
(e.g. PASA IV (4) or with rear support (e.g. PASA II (2), PASA X (10), PASA 51 my
be used only in connection with
8
work positioning ropes EN 358 or lanyards with
energy absorber EN 354 (design in accordance with figure 8) which are suitable for
the joint use of both work positioning attachment elements (= work positioning ropes)
- can be adjusted so that a free fall is limited to at maximum 0.5 m.
Work positioning rings are not suitable for fall arrest purposes!
One-sided use of a work-positioning ring is not permitted!
All Preising full body harnesses with integrated work positioning or restraint rings can
be equipped with an attachment element for guided type fall arrester (no upgrades –
available only when manufacturing).
These attachment elements for guided type fall arresters may only be used in
connection with
7
fall arrest equipment in accordance with EN 353-1, so called
guided type fall arresters.
Attachment possibilities for belt pouches are limited to models with attachment
elements for work positioning and rear support (e.g. PASA X (10), PASA II (2),
PASA 51.
Design features and proper and designated use of the full body harnesses
Fall arrest attachment
element on the back
A
Front mounted fall arrest
attachment element
A/2
Attachment possibilities for belt pouches are only available with models with
restraint function and rear support (e.g. PASA X (10), PASA II (2), PASA 51.
