User Guide
Predia Touch Pro FHD/UHD
6
•
Do not install and use new battery together with the used one.
•
Take out the battery if the remote control is not used for a long period.
•
Do not expose the battery under overheated environments such as sunlight and firing.
•
Dump the used battery based on local regulations.
Do not open the cover or change the product by your own.
High voltage components are installed in the product. When you open the cover, high
voltage, electric shock or other dangerous situations may occur. If inspection, adjust-
ment or maintenance is required, contact the local distributor for help.
Use the specified power supply.
•
Do not use any types of power cables other than the one provided with the product
to prevent the product from being damaged.
•
Use a three-wire socket and ensure that it is properly grounded.
•
Pull out the power plug from the socket if the product is not used for a long period.
Before you move the product, disconnect all external connections and separate all
toppling preventing devices.
Move the product carefully to prevent it from being hit or squeezed, especially the
screen, which may cause injury if broken.
Clean the dust and metal on the power plug regularly.
•
When you are cleaning, fire or electric shock may be caused if the product is powered on.
•
Keep in mind to pull out the power plug before cleaning it by using a dried cloth.
Do not put items on the top of the product.
•
Do not put items, such as a container for liquid (a vase, flowerpot, cosmetics or liquid
medicine), on the top of the product.
•
If any water or liquid is spilled on the product, short circuit may occur and cause fire
or electric shock.
•
Do not tread on the product or hang any items on the product.
Do not install the product in an improper place.
•
Do not install the product in humid places, such as the bathroom, the shower room,
the place near windows or outdoor environments where experience rain, snow or
other harsh weather.
The product installation is also required to avoid a place around by hot spring vapor.
The preceding environments may cause faults or electric shock under extreme conditions.
•
Do not put exposed fire source, such as an ignited candle, on the product.
Pull out the power plug during thunderstorms.
•
Do not touch the product when lighting to avoid electric shock.
•
Install or place components which power supply voltage is high enough to cause
personal injury in places out of the reach of children.
Do not cover or block up any vents on the product.
•
The overheated components may cause fire, damage the product and shorten the
service life.
•
Do not put the venting surface of the product facedown.
