User Guide
Predia Touch Pro FHD/UHD
21
Step 4
Press power switch on the control panel or
Power
on the remote controller to turn on the
interactive display. The OPS is boot. The power indicator turns green.
Power switch
(on the front panel)
3.2 Power off
Step 5
Press
PC Power
to turn off the OPS (for all-in-one models only).
Step 6
Press
Power
on the control panel or
Power
on the remote controller to enter the standby
mode. The power indicator turns red.
Step 7
In the standby mode, switch off the rocker switch to turn off the interactive display.
•
Please turn off the OPS before you turn off the interactive display. Otherwise, the com-
puter may be damaged.
•
Disconnect the interactive display from power after the display enters standby mode.
Otherwise, the display may be damaged. A sudden power failure may damage the inter-
active display.
•
Frequent power on and off in a short time may cause faults.
Warning
Power Indicator
Status
No light
Powered off
Red Standby
Green
Powered on
