Page 13
For technical questions, please call 1-888-866-5797.
ITEM 63078
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
19. At the front of the Carburetor,
remove the Bolt (38) holding the
Fuel Pump Bracket (40) in place. See Figure N.
Fuel pump
Bracket (40)
Bolt (38)
Figure N: Remove Fuel pump Bracket
20. Underneath where the Fuel Pump Bracket was,
the Solenoid Valve (139) is connected.
Note the location of the green wire and green dot on
the connector. Unplug the connector. See Figure O.
Solenoid wire
connector
Note location
of dots here.
Bolt (133)
Carburetor
Intake Elbow
(131)
Bolt
(132)
Bolt
(132)
Figure O: Disconnect Solenoid Valve wire connector
21. Remove Bolt (133) and two Bolts (132) from the
Carburetor Intake Elbow (131). See Figure O.
22. Remove the Carburetor assembly from the engine.
Keep it upright, it may contain fuel.
23. Hold the fuel drain port over a bowl, and open
the Carburetor Drain Plug to allow fuel to drain
out of that port. Once the carburetor is empty,
close the Carburetor Drain Plug. See Figure P.
Carburetor
Drain plug
fuel
drain
port
Figure p: Carburetor Drain
24. Turn the Carburetor assembly over.
25. Remove the four Carburetor Bowl Bolts and
remove the Carburetor Bowl. See Figure Q.
Carburetor
Bowl Bolt
Carburetor
Bowl Bolt
Carburetor
Bowl
Carburetor
Bowl Bolt
Carburetor
Bowl Bolt
Figure Q: Carburetor Bowl Bolts