Precor TRM10/GEN06, Service Manual

Page: 129 / 149

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 127
Cleanliness of the equipment and its operating environment will keep
maintenance problems and service calls to a minimum. Precor recommends
the following preventative maintenance schedule.
In This Section
Regular Preventative Maintenance - performed by owner 127
On-Site Preventative Maintenance - performed by Service Technician 130
Preventative Maintenance Checklist (Facility personnel) 133
Preventative Maintenance Checklist (Service Technician) 134
Regular Preventative Maintenance - performed by owner
The following steps are recommended to be done on a regular basis as
indicated by owner/facility personnel.
Daily
1
Turn off power switch/circuit breaker and unplug the power cord from
the wall outlet.
2
Visually inspect the running deck and belt, make sure that neither the
bed or belt is worn or damaged.
The top side of the belt is a friction/running surface and should NOT be
used to indicate belt wear. Belt wear is all about the under-surface that
touches the deck. Any belt thought to be worn to the point of needing
replacement must be verified by the current draw of the machine.
3
Wipe down the running bed and belt, using a dry or lightly moistened
cloth to clean the top surface of the running belt.
4
Clean all other surfaces of the unit with a diluted solution of simple
green and water (30 parts water to 1 part simple green). Be sure to
dampen the cloth with the solution and then wipe the machine down.
Do not spray liquid directly onto the machine and then wipe.
5
Inspect the power cord, make sure it is not damaged or positioned at
risk of being damaged by the lift mechanism. The power cord is
detachable, make sure there is a cord clamp installed.
Weekly: (Plus Daily Preventive Maintenance)
1
Elevate the treadmill to maximum elevation, then turn off the power
switch/circuit breaker and unplug the power cord from the wall outlet.
Section 10 - Preventive Maintenance