Precor TRM10/GEN06, Service Manual

Page: 136 / 149

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 134
Preventative Maintenance Checklist (Service Technician)
(To be done quarterly by a service technician)

Loosen the tension on the running belt and allow it to relax. (10 to 15 minutes)

Check the tension on the drive belt and adjust if necessary.

Perform "Hardware Validation" tests (except belt speed test).

LEDs functioning properly.

Console keypad keys all function properly.

Both wireless and hand held heart rate function properly

Lift functions properly and does not make excessive noise or vibration.

Visually inspect the running belt for wear or damage.

Inspect the power cord for damage, and make sure there is a power cord clamp installed.

Visually inspect all wiring and connectors, and repair as necessary.

Vacuum and clean under the hood.

Re-tension the running belt using the proper procedure from the service manual.

Adjust running belt tracking as necessary.

Perform "Running Belt and Deck Cleaning Procedure".

While in the "Hardware Validation", run the belt speed test and check current draw both
loaded and un-loaded and verify that it is in spec.
***NOTE: Use the ammeter, not the
reading that is in the hardware validation test.***