manualshive.com logo in svg

Precor Experience 600 Series, Service Manual

Get started with the Precor Experience 600 Series effortlessly by downloading our free Getting Started Manual. This comprehensive manual provides step-by-step instructions and tips to ensure a seamless user experience. Visit manualshive.com to download this essential manual and unlock the full potential of your Precor equipment.

Share
Download
background image

P80 and P82 touchscreen consoles

The P80 and P82 consoles use the touch sensitive touchscreen controls to select items and
navigate the service menus. Only one hardkey "Pause" is used to stop a running diagnostic
test.

Follow the on-screen prompts to run the diagnostic tests.

CONSOLE KEY

FUNCTION/DESCRIPTION

Touchscreen controls

There are various touch sensitive softkey controls (OK.
START, STOP, BACK, etc.) and icon controls (image
boxes, buttons, etc.) used to control and operate the con-
sole. Make selection by touching the softkey control or
icon.

Scroll Up/Dwn

Use your finger to swipe the touchscreen up or down to
scroll through menu items. Some menus provide a ver-
tical scroll bar on the screen right side to scroll Up/Dwn.

BACK

softkey

• Use the touchscreen

BACK

softkey to return to the pre-

vious menu display.
• Continue selecting the

BACK

softkey to exit the service

software.

PAUSE

hardkey

Stop a running diagnostic test.

P62 touchscreen consoles

The P62 console uses a combination of touchscreen softkeys/icons and keypad hardkeys
to select and navigate thru the service and diagnostics menus. The P62 uses the

BACK

keypad button to return to the previous menu and the

PAUSE

hardkey to stop a running dia-

gnostic test.

Follow the on-screen prompts run the diagnostic tests.

CONSOLE KEY

FUNCTION/DESCRIPTION

Touchscreen

controls

There are various touch sensitive softkey controls (OK. START,
STOP, BACK, etc.) and icon controls (image boxes, buttons, etc.)
used to control and operate the console. Make selection by touching
the softkey control or icon.

Scroll Up/Dwn

Use your finger to select while swiping your finger Up/Dwn to scroll
through menu lists. Some menus provide an on-screen scroll bar to
scroll Up/Dwn.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 35

4 Standard Service Menus

Navigating the Service Menus

Summary of Contents for Experience 600 Series

























































































































































































































































































Reviews:

No comments

Related manuals for Experience 600 Series

Pro-Form PFIVEX86012.0 User Manual preview
PFIVEX86012.0
Brand: Pro-Form Pages: 16
CARE FITNESS 55375 Manual preview
55375
Brand: CARE FITNESS Pages: 59
Taurus IC70 Pro Assembly And Operating Instructions Manual preview
IC70 Pro
Brand: Taurus Pages: 36
Tacx Galaxia T1100 Quick Start Manual preview
Galaxia T1100
Brand: Tacx Pages: 5
Sunny Health & Fitness SF-B1805 User Manual preview
SF-B1805
Brand: Sunny Health & Fitness Pages: 34
Vulcan Fitness 53040 Instruction Manual preview
53040
Brand: Vulcan Fitness Pages: 16
NordicTrack 9600 INCLINE TRAINER User Manual preview
9600 INCLINE TRAINER
Brand: NordicTrack Pages: 47
HMS H8890 Manual preview
H8890
Brand: HMS Pages: 52
Life Fitness Essential LCUT8 Parts List preview
Essential LCUT8
Brand: Life Fitness Pages: 5
Sunny Health & Fitness SF-BD2701 User Manual preview
SF-BD2701
Brand: Sunny Health & Fitness Pages: 10
Sunny Health & Fitness SF-RB4905 User Manual preview
SF-RB4905
Brand: Sunny Health & Fitness Pages: 47
ProForm 831.288300 User Manual preview
831.288300
Brand: ProForm Pages: 16
Kettler Astor GT Assembly Instruction Manual preview
Astor GT
Brand: Kettler Pages: 28
Kettler Avus Assembly Instruction Manual preview
Avus
Brand: Kettler Pages: 40
Christopeit Sport 1103 Assembly And Exercise Instructions preview
1103
Brand: Christopeit Sport Pages: 48
Diamondback APEX U6 Owner'S Manual preview
APEX U6
Brand: Diamondback Pages: 32
Fitness Reality X-Class 310 Owner'S Manual preview
X-Class 310
Brand: Fitness Reality Pages: 29
Abilica HP-SP0708PKS Instruction preview
HP-SP0708PKS
Brand: Abilica Pages: 17

Brands by name

Popular brands

Load more brands