Precor Experience 600 Series Service Manual Download

Page: 62 / 280

SYSTEM SETTINGS

MENU

DESCRIPTION

Incline

Default: 15 %

» Auto Stop

menu:

System Settings > Workout Limits > Auto Stop

Automatically stops the machine if an exerciser is not detec-
ted.
Sets Auto Stop to On or Off.
Default: ON

GEM Settings

menu:

System Settings > GEM Settings

Enable/Disable Apple

Gymkit™ Smart Watch connectivity.

» GEM Module

menu:

System Settings > GEM Settings > Gem Module

Range: ON/OFF
Default: OFF
ON: enables the GEM module and Smart Watch connectivity
for Apple Watch

» Enable Developer

menu:

System Settings > GEM Settings > Enable

Developer

OEM use only.

Register Equipment

menu:

System Settings > Register Equipment

Busi-

ness Suite "PBS".
Required information to register the equipment:

Location code

Precor technician account name and password

Serial number from the base

Friendly name assigned to the equipment by the facility
(Example: Equipment Type-Floor-Row-Number)

To complete registration for Preva-networked facilities:

1. Enter the Preva server name (na.preva.com for all

sites).

2. Enter the assigned account name and password.

3. Follow the onscreen instructions to register the product.

Manage Settings

menu:

System Settings > Manage Settings

Save and restore the Connectivity, Display, Media, and
Workout Limits settings.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 52

4 Standard Service Menus

Touchscreen Console Standard Service Menus

Summary of Contents for Experience 600 Series

























































































































































































































































































Search results

Summary of Contents for Experience 600 Series

Reviews:

Related manuals for Experience 600 Series

Brands by name

Popular brands

Precor Experience 600 Series, Service Manual

Search results

Summary of Contents for Experience 600 Series

Reviews:

Related manuals for Experience 600 Series

Brands by name

Popular brands