page 4
Radio Frequency Interference (RFI)
Federal Communications Commission, Part 15
The EFX
®
5.21i has been tested and found to comply with,
•
the IEC EMC Directive (international electromagnetic compatibility certification)
•
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a residential installation. The EFX generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the owner’s manual
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If the EFX does cause harmful interference to radio or television reception, which
can be determined by turning the EFX OFF and ON, you are encouraged to try to
correct the interference using one or more of the following measures:
•
Reorient or relocate the receiving antenna for your TV, radio, VCR, etc.
•
Increase separation between the EFX and the receiver (TV, radio, etc.).
•
Connect the EFX into a different power outlet—on a dedicated circuit different
from the one used by the receiver (TV, radio, etc.). No other appliance should be
plugged into the same power outlet that the EFX is connected to.
•
Consult your dealer or an experienced radio/TV technician for help.
WARNING:
Per FCC rules, changes or modifications not expressly
approved by Precor could void the user’s authority to operate the equipment.
Canadian Department of Communications
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioéélectriques dépassant
les limites applicables aux appareils numériques de la class B prescrites dans le
Règlement sur le brouillage radioélectrique édicté par le ministére des Communica-
tions du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
