Precor C546, Service Manual

Page: 103 / 118

C546 Elliptical Fitness Crosstrainerl
Page 103
12. Carefully feed the interconnect cable out of the center handrail frame tube.
13. Hold the replacement center handrail frame tube near it’s mounting position and feed the
interconnect cable into the bottom of the center handrail frame tube. After the interconnect
cable emerges from the top of the center handrail frame tube, have your assistant hold the
frame tube in it’s mounting position. Set the two halves of the clamp in position, be sure that
the pins in the rear half of the clamp mate with the holes in the frame, thread and hand
tighten the four clamp mounting screws. Tighten the upper clamp mounting screws before
the lower clamp mounting screws. (See Diagram 7.24)
Diagram 7.24 - Clamp Mounting
14. Hold the display assembly in it’s mounting position and reconnect the interconnect cable to
the upper PCA.
15. Position the display enclosure on the display plate. Replace and tighten the display
mounting screws.
16. Reposition the reading rack, replace and tighten the reading rack mounting screws.
17. Reposition the interconnect cable cover, replace and tighten the interconnect cable cover
mounting screws.
18. Hold the upper handrail clamp in it’s mounting position and install and tighten the upper
handrail clamp mounting hardware.
19. Slide the upper end one of the handrails into the upper handrail clamp and then insert the
lower end of the handrail onto the frame tube mount.
20. Tighten the upper handrail screws and lower handrail set screws.
Upper Clamp
Mounting Screw
Lower Clamp
Mounting Screw