9.45, 9.45i Treadmill
Page 51
Diagram 6.7 - Lift Platform
Replacing the Lift Platform
6.
With the treadmill still on its left side, position the lift platform at its mounting position.
7.
Replace the two bolts and nuts that secure the lift platform to the treadmill frame.
Note:
The original nuts used to mount the lift platform are Kep nuts, which do not require a separate
washer. If you do not use Kep nuts to mount the lift platform, use washers when you mount the
lift platform to the treadmill frame.
8.
On 1L units', replace the bolt that connects the actuator block to the lift platform.
9.
Replace the lower bolt and nut that secure the lift motor to the treadmill frame.
10. Check the operation of the treadmill as described in Section Three of this appendix, then
replace the hood.
1L Units Only
Lift Platform
Lift Motor
Summary of Contents for 9.45
Page 55: ...9 45 9 45i Treadmill Page 55 Wiring Diagram 7 1 9 45 1L Unit...
Page 56: ...9 45 9 45i Treadmill Page 56 Block Diagram 7 2 9 45 1L Units...
Page 57: ...9 45 9 45i Treadmill Page 57 Wiring Diagram 7 3 9 45 2P 3Y Units...
Page 58: ...9 45 9 45i Treadmill Page 58 Block Diagram 7 4 9 45 2P 3Y Units...
