ProtEX PD8-6080/PD8-6081 Explosion-Proof Modbus
®
Scanner Instruction Manual
28
Display
Parameter Action/Setting
Description
2413
Byte Order
Select byte-swapped
big-endian byte order.
Not available for Short.
3412
Byte Order
Select byte-swapped
little-endian byte order.
Not available for Short.
t-resp
Response Time
Enter the time allowed
for a slave device to
respond to a command.
slave
Slave
Enter
Slave
Mode
data
Data Type
Enter the Data Type for
each PV
float
Floating Point
Data Type
Floating Point Data
Type. Select
Floating
Point
as the data type to
be read from the slave
device.
short
Short Integer
Data Type
Short Integer Data Type.
Select
Short Integer
as
the data type to be read
from the slave device.
long
Long Integer
Data Type
Long Integer Data Type.
Select
Long Integer
as
the data type to be read
from the slave device.
binary
Binary
Binary Data. Select
Binary
format for Short
or Long integers.
bcd
BCD
BCD Data. Select
BCD
format for Short or Long
integers.
signed
Signed
Signed Data. Select
Signed
Binary format for
Short or Long integers.
unsigd
Unsigned
Unsigned Data. Select
Unsigned
Binary format
for Short or Long
integers.
1234
Byte Order
Select big-endian byte
order.
4321
Byte Order
Select little-endian byte
order.
2413
Byte Order
Select byte-swapped
big-endian byte order.
Not available for Short
integer.
3412
Byte Order
Select byte-swapped
little-endian byte order.
Not available for Short
integer.
t-resp
Response Time
Enter the time allowed
for a slave device to
respond to a command.
setup
Setup
Enter
Setup
menu
pv
Process
Variable
Enter
PV Setup
menu
Pv 1
PV
Select PV 1-16
tag
Tag
Tag
units
Units
Units
formt
Format
Format (Decimal,
Eighths, or Sixteenths of
an Inch)
dec
Decimal
Decimal Format
Display
Parameter Action/Setting
Description
Ft In 8
Eighths
Eighth Inch Format
Ft In 16
Sixteenths
Sixteenth Inch Format
Dec.Pt
Decimal Point
Decimal Point menu
Disp.dp
Display
Decimal Point
Set the decimal point
position for the display.
This is independent from
float decimal point.
flot.dp
Floating
Decimal Point
Floating Decimal Point.
Select the decimal point
for the expected floating
point data.
SCale
Scale PV
Scale PV
Inp 1
Input 1
Calibrate input 1 signal
or program input 1 value
Dis 1
Display 1
Program display 1 value
Inp 2
Input 2
Calibrate input 2 signal
or program input 2 value
(up to 32 points)
Dis 2
Display 2
Program display 2 value
(up to 32 points)
dsplay
Display
Enter
Display Setup
menu
Line 1
Display Line 1
Top Display
D pv
Display PV
Display PVs 1-16
D Ch-C
Display C
Channel
Display Math Channels
C1-C4
Pv.unit
Display PV &
Units
Display PV & Units
Tg.pvn
Display Tag,
PV Number
Display Tag & PV
Number selected
Tg.pvn.u
Display Tag,
PV# & Units
Display Tag, PV Number
selected, & Units
C.unit
Display C &
Units
Display C1-C4 & Units
Tg. C. u
Display Tag, C,
& Units
Display Tag, C1-C4 &
Units
Dset 1
Display Set
Points 1-8
Display Set Points 1-8
Hi-pv
Display Max PV
1-16
Display Maximum value
for each enabled PV1-16
Lo-pv
Display Min PV
1-16
Display Minimum value
for each enabled PV1-16
Hi-C
Display Max Ch
C1-C4
Display Maximum for
math channels C1-C4
Lo-C
Display Min Ch
C1-C4
Display Minimum for
math channels C1-C4
Line 2
Display Line 2
Bottom Display
D tag
Display Tag
Display Tag
D tag.u
Display Tag &
Units
Display Tag & Units
D off
Display off
Display Off
d-Inty
Display
Intensity
Display Intensity
relay
Relay Setup
Enter
Relay Setup
menu
assign
Assign Relay
Assign Relay menu
Relay 1
Relay 1-8
Assign Relay 1-8
Pv 1
PV 1-16
Map Relay to PV 1-16
m-pv
Multiple PVs
Map Relay to Multiple
PVs
Rly 1
Relay 1-8
Relay 1-8
