ProtEX PD8-6080/PD8-6081 Explosion-Proof Modbus
®
Scanner Instruction Manual
30
Menu Navigation Tip
•
The Up arrow scrolls through the sub-menus within a menu, after the last item it returns to the top
menu. Press Enter to step into the menu again or press Up arrow to move to the next menu.
Note: There are some exceptions (e.g. PV - Enable - - Data type
▲ Next PV).
•
Press Menu to exit programming at any time.
Setting Numeric Values
The numeric values are set using the Right and Up arrow buttons. Press the Right arrow to select the next
digit and the Up arrow to increment the digit’s value. The digit being changed is displayed brighter than the
rest. Press and hold the Up arrow to auto-increment the display value. Press the Enter button, at any time,
to accept a setting or the Menu button to exit without saving changes.
Main Menu
The main menu consists of the most
commonly used functions:
Mode
,
Setup
,
Serial
, and
Password
.
•
Press Menu button to enter Scanner
Programming
•
Press Up arrow button to scroll through
the menus
•
Press Menu, at any time, to exit and
return to Run Mode
•
Changes to the settings are saved to
memory only after pressing Enter
•
The display moves to the next menu
every time a setting is accepted by
pressing Enter
0
0
4.000
00
4
.000
00
5
.000
dis 1
dis 1
dis 1
Next
Setting
Select
Next
Digit
Increment
Digital
Value
Accept
Setting
*Analog Output will
only display if installed.
