ProtEX PD8-6080/PD8-6081 Explosion-Proof Modbus
®
Scanner Instruction Manual
82
Service
WARNINGS
•
Installation and service should be performed only by trained service
personnel. Service requiring replacement of internal sub-components
must be performed at the factory.
•
Disconnect from supply before opening enclosure. Keep cover tight
while circuits are alive. Conduit seals must be installed within 18"
(450mm) of the enclosure.
•
Verify that the operating atmosphere of the instrument is consistent
with the appropriate hazardous locations certifications.
•
If the instrument is installed in a high voltage environment and a fault
or installation error occurs, high voltage may be present on any lead
•
Read all product labels completely and follow all instructions and
requirements listed on the labels for installation or service.
If the enclosure is sound and undamaged, then only the internal electronics housing will need to be
returned to the factory for service. Contact the factory for RMA number and return instructions.
Mounting Dimensions
All units: inches (mm)
Figure 21: Enclosure Dimensions
– Front View
Figure 22: Enclosure Dimensions
– Side Cross
Section View
