PRECISION DIGITAL PD6720 Series, Instruction Manual

Page: 22 / 25

PD6720 Field-Mount Loop-Powered Rate/Totalizer
Instruction Manual
22
Operation
Front Panel Buttons Operation
Button
Symbol
Description
Press to enter or exit
Programming Mode or exit
Max/Min readings
Press to reset Max/Min readings
Press to display Max/Min
readings alternately
Press to display Max or Min
reading indefinitely while
displaying Max or Min
Maximum & Minimum Readings
(
MAXIMUM
&
MINIMUM
)
The maximum and minimum (peak & valley) readings
reached by the process are stored in the meter since
the last reset or power-up. The meter shows
MAXIMUM
or
MINIMUM
to differentiate between run mode and
max/min display. Press Enter to remain in Max/Min
display mode. If Enter is not pressed, the Max/Min
display readings will time out after ten seconds. The
meter will return to display the actual reading.
Reset Meter to Factory Defaults
When the parameters have been changed in a way
that is difficult to d
etermine what’s happening, it might
be better to start the setup process from the factory
defaults.
Instructions to load factory defaults:
Enter the Advanced features menu.
Press and hold Reset button when INFO is shown.
Press Enter when RESET DFALTS? prompt is shown
Note: If Enter is not pressed within three seconds, the
prompt will stop flashing return to showing
INFO
.
Factory Defaults & User Settings
The following table shows the factory setting for most
of the programmable parameters on the meter. Next
to the factory setting, the user may record the new
setting for the particular application.
Model: ____________________________________
S/N: ______________________________________
Date: _____________________________________
Parameter Display Default
Setting User
Setting
Programming
PROGRAM
Scale
Input 1 INPt1
4.000 mA
Display 1
Dspl1
4.000
Input 2
INPt2
20.00 mA
Display 2
Dspl2
20.000
Decimal point
rate
Dd.ddd
3 places
Decimal point
total
Dddddd.dd
2 places
Tag
tag
Off
Time Base
tbase
Minute
Conversion
Factor
TotCF
1.0000
Total Reset
Function
T rst
Manual -
Enabled
Password
PASSWRD
00000
(unlocked)
Programming
PROGRAM
Scale
Advanced Features
Output
OUTPUT
Off
Function
FUNCTN
Linear
Cutoff
CUTOFF
0
(disabled)
Filter
FILTER
Low
MENU
RESET
DISPLAY
ENTER