Model PD655 Large Display Process Meter
Instruction Manual
86
Panel Mounting Instructions
For applications where it is required to mount the meter into a panel, the
PDA6554 panel mounting kit is available (see
Ordering Information
on page 8).
1
2
MOUNTING PLATE
PANEL
(4) MTG. BRACKETS
3
(4) SELF TAPPING
SCREWS
SEE NOTES
(12) WASHERS
PANEL OPENING
Figure 32.
Panel Mounting Instructions
Instructions:
1. Insert the meter through the mounting plate.
2. Mount assembly on panel.
3. Secure with 4 brackets and 4 screws at corners of the meter.
Use washers as needed to allow for panel thickness.
Notes:
1. Allowable panel thickness: 0.060" – 0.125" (1.5 mm – 3.2 mm)
2. Panel cutout required: 6.57" x 5.40" (167 mm x 137 mm)
3. Mounting plate overall dimensions: 7.57" x 6.40" x 0.125"
(192 mm x 163 mm x 3 mm)
4. Mounting brackets require 0.8" (20 mm) on either top or side of meter for
installation.
5. This panel mounting kit is not intended to provide waterproof protection to
the panel.
