Model PD6200 Analog Input Rate/Totalizer
Instruction Manual
91
Display Parameter
Action/Setting
Description
Little
Little display
To assign the small display parameters
LL I 1
Logic level input
1
Assign logic level input 1 – 8, if expansion
modules are connected
LL O 1
Logic level out-
put 1
Assign logic level output 1 – 8, if expansion
modules are connected
locd
Locked
Enter password to unlock meter
Lt-CLr
Latching-cleared
Set relay for latching operation with manual
reset only after alarm condition has cleared
(relays assigned to rate)
mA
4-20 mA
Set meter for 4-20 mA input
mAn
Manual
To manually control
mAx
Maximum
Program maximum mA output allowed
menu
Menu button
Assign digital input to Menu button
min
Minimum
Program minimum mA output allowed
No PtS
Number of points
Set meter for 2 to 32-point linearization
nonrst
Non-resettable
Non-resettable grand total set after entering
“050873” for Gtotal password
O Hold
Relay output hold
OFF
Off
Fail-safe off
Off
Disable relay and front panel status LED
Disable fail-safe operation
Relay goes to non-alarm condition when
loop break is detected
OFF 1
Off
Set relay 1 Off time delay
On
On
Relay goes to alarm condition when loop
break is detected
Enable fail-safe operation
On 1
On
Set relay 1 On time delay
O-rang
Overrange
Program mA output for display overrange
Out 1
Output 1
Program output 1 value (e.g. 4.000 mA)
Out 2
Output 2
Program output 2 value (e.g. 20.000 mA)
pass
Password
Enter the
Password
menu
Pass 1
Password 1
Set or enter Password 1
