Model PD6200 Analog Input Rate/Totalizer
Instruction Manual
22
-
+
+
Voltage
Signal
mA+
P-
2
1
3
5
4
P+
V+
COM
INPUT SIGNAL
mA+
P-
2
1
3
5
4
P+
V+
COM
INPUT SIGNAL
3-Wire Voltage
Transducer
Signal
-
Figure 10: Voltage Input Connections
The meter is capable of accepting any voltage from -10 VDC to +10 VDC.
Serial Communications
Serial communications connection is made to an RJ45 connector labeled
M-LINK on Figure 6. Use PDA1232 for RS-232 interfacing or the
PDA1485 for RS-422/485 interfacing. The same port is used for interfac-
ing with all expansion modules (e.g. external relays, digital I/O).
Use the PDA1200 meter copy cable
for meter-to-meter interfacing for
cloning purposes (
i.e.
copying settings from one meter to other meters).
Relay Connections
Relay connections are made to two six-terminal connectors labeled
RELAY1 – RELAY4 on Figure 6. Each relay’s C terminal is common only
to the normally open (NO) and normally closed (NC) contacts of the cor-
responding relay. The relays’ C terminals should not be confused with
the COM (common) terminal of the INPUT SIGNAL connector.
C
NO
NO
NC
NC
C
RELAY4
RELAY3
4
3
6
5
2
1
C
NO
NO
NC
NC
C
RELAY2
RELAY1
4
3
6
5
2
1
Figure 11: Relay Connections
