Loop Leader PD6620 Series Loop-Powered Rate/Totalizer Instruction Manual
36
Batch Control (
BATCH
)
Selecting batch control for relay 1 will enable batching features on the meter. The top display will be
changed to show the total and the bottom display will be changed to display the preset batch amount. The
function keys will be changed so that F1 starts a batch, F2 opens the preset menu to allow the preset
value to be changed, and F3 stops the currently running batch. Enabling batch control for relay 1 will al-
low access to the
BATCH
menu under relay 2 (this menu does not appear by default).
Batch Control Relay 1
The batch total can be set to count
UP
or
DOWN
. The batch
MAXIMUM
is the max preset amount that can
be batched. Batching can be set to either manual or automatic operation (
MANUAL
or
AUTO
). If setting
batching to automatic, a delay before the next batch is started must be programmed. The
PRESET
amount is the value at which the batch will stop and can be programmed up to the value assigned in the
MAXIMUM
menu. An on and off delay may be set for batching relays.
Batch Control Relay 2
The
BATCH
option only appears under relay 2 if relay 1 has also been set to batch control. The second
relay may be programmed as a preclose relay or as another batching relay with its own preset amount.
RLY 1
BATCH
BATCH
COUNT
BATCH
MAXIMUM
BATCH
MODE
BATCH
PRESET
COUNT
UP
COUNT
DOWN
MAX
GAL
MAX
0,010,000.0
Flashes
Units
MODE
MANUAL
MODE
AUTO
PSET
GAL
PSET
0,001,000.0
Flashes
Units
BATCH
DELAY
DELAY
ON
TIME
0000 SEC
DELAY
OFF
TIME
0000 SEC
DELAY
9999 SEC
RLY 2
BATCH
BATCH
PRECLOSE
YES
PRECLOSE
NO
PRECLOSE
CLOSE
GAL
CLOSE
0,000,200.0
Flashes
Units
BATCH
DELAY
DELAY
ON
TIME
0000 SEC
DELAY
OFF
TIME
0000 SEC
BATCH
PRESET2
PSET2
GAL
PSET2
0,000,800.0
Flashes
Units
