Loop Leader PD6620 Series Loop-Powered Rate/Totalizer Instruction Manual
17
Setup and Programming
The meter is factory calibrated prior to shipment to display 0 to 100,
which corresponds to the 4-20 mA input. The calibration equipment
is traceable to NIST standards.
Overview
There are no jumpers to set; setup and programming is done through the front panel buttons or PC-based
software.
The meter may be powered via the micro-USB connection located on the right side of the meter for the
purposes of programming only. The backlight will not work while the meter is powered via the USB con-
nection.
Front Panel Buttons and Status LED Indicators
PD6622/PD6626
PD6624/PD6628
Button
Symbol
Description
LCD Status
Menu
!
Alarm Indicator
(PD6622 Only)
Right-Arrow/F1
Password Protection
Indicator
(PD6622 Only)
Up-Arrow/F2
G
Grand Total Indicator
(PD6622 Only)
Enter/F3
T
Total Indicator
(PD6622 Only)
•
Press the
Menu
button to enter or exit the
Programming Mode
at any time.
•
Press or hold the
Right-Arrow
button to scroll forward through the menus, select digits during nu-
meric programming, select characters during text programming, or decrement the value of a digit or
character selected with the
Up
-
Arrow
button.
•
Press and hold the
Right-Arrow
button to zero or clear digits/characters while in data-entry mode.
•
Press or hold the
Up
-
Arrow
button to scroll backwards through the menus or to increment the value
of a digit or character.
•
Press the
Enter
button to access a menu or to accept a setting or programmed digit/character value.
