Loop Leader PD6620 Series Loop-Powered Rate/Totalizer Instruction Manual
18
MeterView XL Programming Software
The meter can also be programmed using PC-based MeterView XL software. This software greatly simpli-
fies the programming process and also allows the user to save configuration files for later use.
The meter connects to the PC via a provided micro-USB cable and is powered by the USB connection, so
no additional power is needed during programming.
For detailed software instructions or to download MeterView XL software, visit
predig.com/meterviewxl
.
CAUTION!
Care should be exercised to avoid ground loops when connecting the USB to an active
loop (e.g. power supply, transmitter, loop-powered meter, etc.). It is recommended to
connect the (mA+) terminal of the meter to the (-) terminal of a two-wire transmitter.
!
