Precision Digital Corporation ProtEX PD6830-AX0-I-2, Instruction Manual

Page: 33 / 64

PD6830X Explosion-Proof Modbus Scanners
Instruction Manual
33
Tank Size Indicator (
TANKSZ
)
The
Tank Size
menu defines the 100% full level for
the 20-segment tank level indicator on feet and inches
display models. This menu is not present in decimal
display models. All PV values displayed on the top
line feet and inches display will use this tank level
indicator.
To set the maximum height of the tank level indicator,
enter the level for thank to display as full. Enter the
full value in feet.
See
Setting Numeric Values
on page
18
for more
information on entering the tank full level in feet.
Press
Enter to confirm and save the tank level indica-
tor full value.
Tag Display Time (
T-TAG
)
If either display is set to toggle a custom tag as part of
the Top Display or Bottom Display programming the
scanner will prompt for a toggle time with this menu.
The custom tag for each variable will display before
each variable for a number of seconds set by this
parameter. The tag may be programmed to display for
1 to 49 seconds.
Press
Enter to access the
Tag Display Time
menu.
Use the Up and Right buttons to enter the tag display
time. Press Enter to make a selection and proceed to
the next menu. See
Setting Numeric Values
on page
18
for more information.
Press the Menu button to exit without saving changes.
Units Display Time (
T-UNITS
)
If either display is set to toggle units as part of the
Top
Display or Bottom Display programming the scanner
will prompt for a toggle time with this menu.
The unit for each variable will display before each vari-
able for a number of seconds set by this parameter.
The unit may be programmed to display for 1 to 49
seconds.
Press
Enter to access the Units Display Time menu.
Use the Up and Right buttons to enter the units dis-
play time. Press Enter to make a selection and pro-
ceed to the next menu. See
Setting Numeric Values
on page
18
for more information.
Press the Menu button to exit without saving changes.
Scan Time (
T-SCAN
)
The scan time defines how long a variable will be
shown on the display while automatically scanning.
After the scan time has elapsed, the next tag, unit,
and variable will be displayed.
The scan time may be programmed to cycle the
display to the next variable every 2 to 99 seconds.
Press
Enter to access the
Scan Time
menu. Use the
Up and Right buttons to enter the scan time. Press
Enter
to make a selection and proceed to the next
menu. See
Setting Numeric Values
on page
18
for
more information.