Precision Digital Corporation ProtEX PD6830-AX0-I-2 Instruction Manual Download Page 26

Page: 26 / 64

PD6830X Explosion-Proof Modbus Scanners

Instruction Manual

Setup the Display (

SETUP

)

The

Setup

menu is used to select what information

will be displayed on the top and bottom display.
The

Display

menu is used to select the top and bot-

tom display to show Modbus PVs and math channels,

and combinations of units and tags. The math chan-

nels are configured in the

Advanced Features

menu.

•

The

Pulse Input

menu is not described or used in

this manual.

•

For instructions on how to use and configure the

pulse input, refer to the LIM6830XPulse manual.

Press the

Enter

button to access any menu or press

the

arrow button to scroll through choices.

Press the

Menu

button to back out of a menu or hold

the

Menu

button to exit at any time.

Setting Up the Display (

DISPLAY

)

The

Display

menu is used to set parameters to show

on the top and bottom displays; select which PVs will

appear on the top and bottom displays; set how long

to display the tags and units; and program the scan

time for each channel (how long a specific channel

will display before moving to the next value).

Note 1: The Top Display menu does not appear on

feet and inches display models.

Note 2: The math menu (MATH) is only visible if a

math channel has been enabled. See Math

Channel (CV1 to CV4) Programming

(

MATH

)

on page 41 for details about enabling the

math channels.

Note 3: The Tank Size menu appear only in Feet and

Inches Display Models.

Note 4: The Tag Time and Units Time menus will not

appear unless the Top Display or Bottom Dis-

play parameters are set to display or alternate

a tag or unit.

Refer to manual

with pulse input

Note 4

Note 3

Note 1

Note 2

Summary of Contents for ProtEX PD6830-AX0-I-2

































































Search results

Summary of Contents for ProtEX PD6830-AX0-I-2

Reviews:

Related manuals for ProtEX PD6830-AX0-I-2

Brands by name

Popular brands

Precision Digital Corporation ProtEX PD6830-AX0-I-2, Instruction Manual

Search results

Summary of Contents for ProtEX PD6830-AX0-I-2

Reviews:

Related manuals for ProtEX PD6830-AX0-I-2

Brands by name

Popular brands