PD6830X Explosion-Proof Modbus Scanners
Instruction Manual
20
Display
Parameter
Action/Setting
TAG
Tag
Enter to edit PV tag
UNITS
Units
Enter to edit PV units
DISP.DP
Display Decimal
Point
Set the PV display
decimal point
Note: Not available
on Ft-In models.
FLOAT.DP
Float Decimal
Point
Set the float decimal
point location (if PV
is float data type
only)
Note: Not available
on Ft-In models.
SCALE
Scale
Select the PV display
scaling: factor, linear
2-point, or multi-point
FACTOR
Conversion
factor
Conversion factor
scaling
LINEAR
Linear
Linear scaling
MP-SCAL
Multipoint
Scaling
Multipoint scaling for
PV1
MATH
Math
Enter
Math
menu
(Will only appear if at
least one math
channel is enabled)
CV 1
CV1 to CV4
Select math channel
to configure CV 1 to
CV4
FORMAT
Format
Enter CV display
format
TAG
Tag
Enter the CV tag
UNITS
Units
Enter the CV units
Disp.DP
Display Decimal
Point
Set the CV display
decimal point
TANKSZ
Tank Size
Enter tank level
indicator full value (in
feet for Ft & In
version only)
T-TAG
Tag Time
Enter tag display
time
T-UNITS
Units Time
Enter unit display
time
T-SCAN
Scan Time
Enter scan cycle time
(e.g. PV dwell time)
PULSE.IN
Input
Refer to pulse input
manual
COMM
Communications
Enter the
Communications
menu
SCAN ID
Scanner ID
Enter the scanner’s
Modbus ID (used if
setup as a slave)
BAUD
Baud Rate
Select baud rate
Display
Parameter
Action/Setting
TXDELAY
Transmit Delay
Enter the transmit
delay
PARITY
Parity
Select parity mode
EVEN
Even
Even parity
ODD
Odd
Odd parity
NONE 1
None, 1 Stop Bit
No parity, 1 stop bit
NONE2
None, 2 Stop
Bits
No parity, 2 stop bits
