Precision Digital Corporation ProtEX MAX PD8-6060-6H0 Instruction Manual Download Page 2

Page: 2 / 66

ProtEX-MAX PD8-6060 Explosion-Proof Dual-Input Meter Instruction Manual

Disclaimer

The information contained in this document is subject to change without notice.

Precision Digital makes no representations or warranties with respect to the contents

hereof and specifically disclaims any implied warranties of merchantability or fitness

for a particular purpose.

CAUTION

: Read complete

instructions prior to installation

and operation of the meter.

WARNING

Risk of

electric shock or

personal injury.

Warning!

•

This product is not recommended for life support applications or

applications where malfunctioning could result in personal injury or

property loss. Anyone using this product for such applications does so at

his/her own risk. Precision Digital Corporation shall not be held liable for

damages resulting from such improper use.

•

Failure to follow installation guidelines could result in death or serious

injury. Make sure only qualified personnel perform the installation.

•

Never remove the instrument cover in explosive environments when the

circuit is live.

•

Cover must be fully engaged to meet flameproof/explosion-proof

requirements.

•

Information in this manual supersedes all enclosure, compliance, and

agency approval information included in additional product manuals

included with this product.

Limited Warranty

Precision Digital Corporation warrants this product against defects in material or

workmanship for the specified period under “Specifications” from the date of

shipment from the factory. Precision Digital’s liability under this limited warranty shall

not exceed the purchase value, repair, or replacement of the defective unit.

Registered Trademarks

MeterView

Pro is a registered trademark of Precision Digital Corporation. Modbus

is a

Registered Trademark of Schneider Automation Inc. All other trademarks mentioned in

this document are the property of their respective owners.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for ProtEX MAX PD8-6060-6H0



































































Search results

Summary of Contents for ProtEX MAX PD8-6060-6H0

Reviews:

Related manuals for ProtEX MAX PD8-6060-6H0

Brands by name

Popular brands

Precision Digital Corporation ProtEX MAX PD8-6060-6H0, Instruction Manual

Search results

Summary of Contents for ProtEX MAX PD8-6060-6H0

Reviews:

Related manuals for ProtEX MAX PD8-6060-6H0

Brands by name

Popular brands