Precision Digital Corporation ProtEX MAX PD8-6060-6H0 Instruction Manual Download Page 27

Page: 27 / 66

ProtEX-MAX PD8-6060 Explosion-Proof Dual-Input Meter Instruction Manual

Main Menu

The main menu consists of the most commonly

used functions:

Reset, Control, Setup

, and

Password

•

Press Menu button to enter Programming

Mode then press the Up arrow button to

scroll main menu.

•

Press Menu, at any time, to exit and return

to Run Mode. Changes made to settings

prior to pressing Enter are not saved.

•

Changes to the settings are saved to

memory only after pressing Enter.

•

The display moves to the next menu every

time a setting is accepted by pressing Enter.

Setting Numeric Values

The numeric values are set using the Right and Up arrow buttons. Press Right arrow to select next digit

and Up arrow to increment digit value. The digit being changed is displayed brighter than the rest. Press

and hold Up to auto-increment the display value. If negative numbers are allowed, the first digit position

will include a negative symbol (

) after the 9.

Press the Enter button, at any time, to accept a setting or Menu button to exit without saving changes.

4.000

.000

dis 1

Setting

Select

Digit

Increment

Digital

alue

Setting

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for ProtEX MAX PD8-6060-6H0



































































Search results

Summary of Contents for ProtEX MAX PD8-6060-6H0

Reviews:

Related manuals for ProtEX MAX PD8-6060-6H0

Brands by name

Popular brands

Precision Digital Corporation ProtEX MAX PD8-6060-6H0, Instruction Manual

Search results

Summary of Contents for ProtEX MAX PD8-6060-6H0

Reviews:

Related manuals for ProtEX MAX PD8-6060-6H0

Brands by name

Popular brands