Precisa 360 ES Series, Operating Instructions Manual

Page: 12 / 77

■ 7 Introduction
10
7 Introduction
These balances are simple and functional to operate.
The versatile weighing programs allow you to use these balances not only for simple weighing procedures
but also in a simple manner for carrying out various weighing applications such as, for example, percentage-
or component counting weighings and document the measurements obtained accurately and unequivocally.
Virtually all models can be delivered in weights and measures approved.
The most important basic production features of the Precisa balances include:
• Simple-to-use 10-key multifunction control panel
• Large LCD display with multi-line display
• Anti-theft encoding with four-figure numerical code
• 10 user profiles (MUM Multiuser Memory)
• ICM-Autocalibration (intelligent calibration mode)
• USB device interface for data transfer to PC
• RS232/V24 serial interface for data transfer to PC or printers
• ISO- and GLP-compliant reporting of results of measurements
• Capacity and residual tare display
• Various application programs:
Piece counting, Percentage weighing, Formulation, Animal weighing, Calculator, Check and reference
weighing and lot others
• Statistics program
• Appliance for below-balance weighing
7.1 Useful tips on the Operating Instructions
You should read through these operating instructions in their entirety, so that you can make optimum use of
the full potential and the diverse features of the balance in your daily work.
These operating instructions contain guidance in the form of pictograms and keyboard diagrams, which
should help you find the required information:
• Key names are presented in quotation marks and are highlighted in semi-bold script:
« ON/OFF » or «
F
».
• When explaining the operating steps, the appropriate display for the current operating step is shown for
clarity at the left alongside the list of operating steps:
7.2 Warranty card
A warranty card, which was filled in by your dealer before handing over the balance, is enclosed with the
instruction manual.
7.3 Conformity
The balance has been manufactured and tested in accordance with the standards and recommendations set
out in the enclosed certificate of conformity.
The power adaptor produced for the operation of the balance and intended exclusively for this application,
complies with Electrical Protection Class II.
Display Key Step
- - - - - - - -
«
D
»
Press repeatedly, until the language currently activated is dis-
played.
language english
NOTE
Check that the warranty card is enclosed with these operating instructions and is completely filled out.