10 Operation
■
21
En
gl
is
h
10.3.8 Anti-theft encoding
The balance can be protected against theft by using a freely selectable, four-digit numerical code:
• If the anti-theft code is deactivated, the instrument can be re-started and operated after a power outage
without having to enter a code.
• If the anti-theft code is activated, the instrument requires the code to be input after each power outage.
• If the code is entered incorrectly, the instrument is locked.
• If the instrument is locked, it must first be disconnected from the power supply, then reconnected and
unlocked by entering the correct code.
• After seven consecutive incorrect entries, the display reads „NO ACCESS, CALL SERVICE”. In this case
only a service engineer can unlock the instrument again.
Procedure to activate the anti-theft encoding:
The procedure for changing the code is as follows
:
NOTE
The anti-theft encoding is deactivated in the factory settings.
The
preprogrammed code
set at the factory is:
8 9 3 7
This code is the same in all balances. Therefore, for security reasons, enter your own code.
Keep your
own code
in a safe place.
• THEFTCODE
THEFTCODE
––––
THEFT-PROTECTION ON/
OFF
Switch encoding on/off
NEW CODE
––––
Enter a new code
Display
Key
Step
- - - - - - - -
«
D
»
Press repeatedly, until the „THEFTCODE“ is displayed.
theftcode - - - -
- - - - - - - -
«
E
»
The first digit in the code flashes and can be changed.
theftcode
0
0 0 0
- - - - - - - -
«
D
»
Press repeatedly, until the first digit in the code is set.
theftcode
8
0 0 0
- - - - - - - -
«
B
»
The second digit flashes.
The code can now be entered fully.
theftcode 8
0
0 0
- - - - - - - -
«
E
»
Confirm the theft code.
theftcode 8000
- - - - - - - -
«
B
»
The theft-protection can now be set.
theft-protection off
- - - - - - - -
«
E
»
The display flashes, and the theft-protection can be
activated.
theft-protection
off
- - - - - - - -
«
D
»
Activate the theft-protection.
theft-protection
ON
- - - - - - - -
«
E
»
Confirm the theft-protection.
theft-protection
on
Display
Key
Step
- - - - - - - -
«
D
»
Press repeatedly, until „NEW CODE“ appears.
Set the new code as described above.
new code 8 9 3 7
Summary of Contents for 360 ES Series
Page 1: ...Operating Instructions 350 8132 000 d1 Precisa 360 ES EXECUTIVE...
Page 2: ......
Page 9: ...6 Accessories 7 English...
Page 37: ...13 Check Weighing 35 English...