Owner’s Manual for 50 Hz Air-Cooled Generator Sets
iii
Original document - written in English.
EC Declaration of Conformity
Manufacturer:
Generac Power Systems, Inc.
S45 W29290 Hwy 59
Waukesha,
WI
53189
USA
Generac Power Systems, Inc. hereby declares that the machinery described below fulfils all the relevant provisions of the
Machinery Directive 2006/42/EC. The Machinery also conforms to the relevant provisions of the Outdoor Noise Directive
2000/14/EC (as amended by Directive 2005/88/EC) Notified body: SNCH, 2a, Kalchesbruck L
–
1852 Luxembourg and
the Radio Equipment Directive 2014/53/EU.
Machinery Description:
Generator Set
Model Numbers:
Generac Model Numbers; G007189# and G007289# (#
–
0 to 9 for minor design
changes)
The following standards have been complied with in part or in full as relevant:
Machinery Directive 2006/42/EC Harmonised Standards applied:
EN ISO 8528-13:2016
–
Reciprocating internal combustion engine driven alternating current generating sets
IEC 60204-1:2010/AC:2010
–
Electrical equipment of machines
–
Part 1: General requirements
ISO 12100:2010
–
General principles for design - Risk Assessment and risk reduction, includes EN 14121:2007
Additional standards that have either been referred to or been complied with in part or in full as relevant:
ISO 8528 series
–
Reciprocating internal combustion engine driven alternating current generating sets
ISO 8528-1:2005
–
Application, ratings, and performance
ISO 8528-5:2013
–
Generating sets
IEC 60034-1:2010
–
Rotating electrical machines
–
Part 1: Rating and performance
Harmonised Standards applied for Outdoor Noise Emission Directive 2000/14/EC:
ISO 8528-10:1998
–
Measurement of airborne noise by the enveloping surface method
EN ISO 3744:1995
–
Determination of sound power levels and sound energy levels of noise sources using sound pressure
Model numbers G007189# & G007289# measured sound power level 94.4 dB(A), guaranteed sound power level 95 dB(A)
Harmonised Standards applied for Radio Equipment Directive 2014/53/EU:
EN 55012:2007+A1:2009
–
Vehicles, boats and internal combustion engines
–
Radio disturbance characteristics
ETSI EN 300 328 V2.1.1:2016
–
Electromagnetic Compatibility and Radio Spectrum Matters
ETSE EN 301 489-1:2017 Ed.V2.1.1
–
Electromagnetic Compatibility for Radio Equipment
ETSE EN 301 489-17:2017 Ed.V3.1.1
–
Electromagnetic Compatibility for Radio Equipment
EN 61000-6-2:2005+C1:2005
–
Electromagnetic Compatibility
–
Part 6-2: Generic Standards
–
Immunity-Industrial
EN 61000-6-3-3:2007+A1:2011
–
Electromagnetic Compatibility
–
Part 6-3: Generic Standards
–
Emission
A Technical file has been compiled in accordance with Part A of Annex VII of Machinery Directive 2006/42/EC and is available
to the European National authorities upon request.
Jeffrey Jonas
Signature:
Staff Engineer-Certifications
Generac Power Systems, Inc.
S45 W29290 Hwy 59
Waukesha, Wisconsin, USA
This document was made at Generac Power Systems, Inc. at the address noted above on October 4, 2018