Safety Information
Owner’s Manual for 50 Hz Air-Cooled Generator Sets
7
Operation
Maintenance
Verify the generator set is installed in
accordance with the manufacturer’s
instructions and recommendations.
ISO000539
Following proper installation, do nothing
that might alter a safe installation and
render the unit in noncompliance with
locally applicable codes, standards,
laws, and regulations.
ISO000540
Never connect this unit to the electrical
system of any building unless a licensed
electrician has installed an approved
transfer switch.
ISO000150
Do not alter construction of, installation,
or block ventilation for generator set.
ISO000146
This product is not intended
to be used in a critical life
support application.
ISO000209b
Hot surface. Keep equipment away from
combustible materials during operation.
Do not touch hot surfaces when operating
equipment. After equipment shutdown,
allow sufficient time for surfaces to cool
prior to contact.
ISO000108
Asphyxiating atmosphere. Carbon
monoxide, a colorless odorless poisonous
gas, is emitted in engine exhaust while
equipment is running. Avoid inhalation
of exhaust gases.
ISO000103
Pinch point. Keep hands clear of
these areas when installing the
front panel or closing the roof.
ISO000526
Inspect the generator set regularly, and
contact the nearest servicing dealer
for parts needing repair or replacement.
ISO000524
This unit is not designed for use in
hazardous areas or explosive
atmospheres.
ISO000547
Keep clothing, hair, and appendages
away from moving parts.
ISO000111
This unit is not intended for use as a
prime power source. It is intended for use
as an intermediate power supply in the
event of a temporary power outage only.
ISO000247a
Do not wear jewelry when starting
or operating this product.
ISO000115
Batteries contain sulfuric acid and can
cause severe chemical burns. Wear
protective gear when working with
batteries.
ISO000138a