2
KEYS
There are four tactile keys provided on the front panel for configuring the controller, setting-up the parameter values and
selecting Operation Modes. Refer Table 1.2 for detailed key operations.
Table 1.2
Symbol
Key
Function
Press to enter or exit set-up mode.
DOWN
UP
ENTER
Press to store the set parameter value and to scroll to the next
parameter on the PAGE.
Press to increase the parameter value. Pressing once increases the
value by one count; keeping pressed speeds up the change.
Press to decrease the parameter value. Pressing once decreases
the value by one count; keeping pressed speeds up the change.
PAGE
AL2
• Flashes while the Alarm-2 is active.
• Remains OFF while the Alarm - 2 is inactive or if OP3 is configured as
Recorder / Retransmission.
Indicates Alarm-1 status if Output -3 (OP3) is configured as Alarm.
PRF
• Flashes while the controller is executing ramp/soak profile cycle.
• Glows continuously if the profile cycle is in HOLD state.
• Remains OFF, if not executing a profile Cycle.
Indicates profile status if the Profile mode is Enabled.
User Manual
neuro 102
