WMA-5 Operation Manual V. 1.01
60
It is recommended that you record any changes you make.
SSID: ________________________________________
Security Suite: ________________________________
Encryption: ___________________________________
Passphrase: __________________________________
Connecting to WMA-5 via a Local Area Network
Here are the steps to make a wireless connection to the WMA-5 using the Client Mode method in which
the WMA-5 is connected to a user’s existing Local Area Network via a user’s existing wireless access
point or wireless router. Once the WMA-5 is joined to the LAN, any computer or wireless device that is
also joined to the LAN can view the WMA-5 web pages.
1. First, connect to the WMA-5 using the SoftAP method described above from any wireless device.
Then navigate to the Wireless Network Settings (
Main > Settings > Yes
).
2.
WLAN QuickConnect:
QuickConnect offers the ability to configure the STA (WLAN Client)
interface on WMA-5 WiFi to establish connection to an active Access Point. QuickConnect learns
most of the connection properties from the available Access Points and prompts the user only for
the security parameters and saves the settings under a corresponding new/existing WLAN profile
for future autonomous operation of the WLAN Client interface.
3. Upon selection of the QuickConnect option, the WMA-5 Wi-Fi scans and displays up to 20
wireless devices in order of strongest signal strength at the top. Click on a network name to view
the connection to that desired Access Point.