PowerTek MC642, Operation Manual

Page: 18 / 73

Timing table – a list of values in Ω and their durations in seconds. Browsing through the table is done by
▲ , ▼ cursor keys. Editing is done using these soft keys:
Add – create a new point.
Figure 16 Timing sequence point editing
Duration – duration of selected resistance (from 2 ms to 60 s). Press the
SELECT
key to
proceed.
Resistance – corresponding Ω value. Range is given by the actual resistance range of the
decade.
Edit – show the “Timing edit” panel for selected point to allow editing.
Delete – delete selected point.
Cancel – deactivate the Lookup Table and allow for curve saving.
Save – closes the table and saves current settings.
Cancel – closes the table and does not save current settings.
Editing an existing table
Existing table can be edited in the same way as it can be created. Editable entries (Sequence name, Timing
table points) are selected using the
SELECT
key.
Figure 17 Timing sequence edit
18 Operation manual