background image

Page 4  — English

SPECIFIC SAFETy RULES

  Never direct a water stream toward people or pets, 

or any electrical device.

 

Before  starting  any  cleaning  operation, 

close  doors 

and  windows.  Clear  the  area  to  be  cleaned  of  debris, 
toys, outdoor furniture, or other objects that could create 
a hazard.

 

Never pick up or carry a machine while the engine is 
running.

  Never start the machine 

if ice has formed in any part 

of the equipment.

  Do  not  use  acids,  alkalines,  solvents,  flammable 

material,  bleaches,  or  industrial  grade  solutions 

in  this  product.  These  products  can  cause  physical 
injuries to the operator and irreversible damage to the 
machine.

  Always operate the machine

 on a level surface. If the 

engine is on an incline, it could seize due to improper 
lubrication (even at the maximum oil level).

  WARNING:  High  pressure  jets  can  be  dangerous 

if subject to misuse. 

The jet must not be directed at 

persons, animals, electrical devices, or the machine 
itself.

 

Never  attempt  to  make  any  adjustments  while  the 
engine  (motor)  is  running 

(except  where  specifically 

recommended by the manufacturer).

  Protective covers must always cover rotating parts 

when the engine is running.

 

Keep cooling air intake 

(recoil starter area) and muffler 

side of the engine at least 3 feet away from buildings, 
obstructions, and other combustible objects.

 

Keep  the  engine  away  from  flammables  and  other 
hazardous materials.

 

Keep away from hot parts. 

The muffler and other engine 

parts become very hot; use caution.

 

Do not touch the spark plug and ignition cable 

when 

starting and operating the engine.

  Check fuel hoses and joints

 for looseness and fuel 

leakage before each use.

  Check bolts and nuts

 for looseness before each use. 

A loose bolt or nut may cause serious engine prob-
lems.

  Before  inflating  the  tires,  confirm  that  the  bolts  in-

stalled in the wheel hubs are securely tight.

 The tire 

should be inflated only using a hand pump with inflation 
pressure no greater than 25 psi. Confirm the pressure 
of the tires during and after inflation using a reliable tire 
pressure gauge.

 

Always  refuel  outdoors. 

Never  refuel  indoors  or  in  a 

poorly ventilated area.

 

Never  store  the  machine  with  fuel  in  the  fuel  tank  
inside  a  building

  where  ignition  sources  are  present, 

such  as  hot  water  and  space  heaters,  clothes  dryers, 
and the like.

 

If the fuel tank has to be drained, do this outdoors.

 

To reduce the risk of fire and burn injury, 

handle fuel 

with care. It is highly flammable.

 

Do not smoke while handling fuel.

 

Add fuel before starting the engine. 

Never remove the 

cap of the fuel tank or add fuel while the engine is running 
or when the engine is hot.

 

Loosen fuel cap slowly 

to release pressure and to keep 

fuel from escaping around the cap.

 

Replace all fuel tank and container caps securely.

 

Wipe spilled fuel from the unit.

 Move 30 feet away from 

refueling site before starting engine.

 

If fuel is spilled, 

do not attempt to start the engine but 

move the machine away from the area of spillage and 
avoid  creating  any  source  of  ignition  until  fuel  vapors 
have dissipated.

 

Never  attempt  to  burn  off  spilled  fuel  under  any 
circumstances.

 

Before storing, allow the engine to cool.

 

Store fuel in a cool, well-ventilated area,

 safely away 

from spark and/or flame-producing equipment.

 

Store fuel in containers 

specifically designed for this 

purpose.

 

Empty  fuel  tank  and  restrain  the  unit  from  moving 

before transporting in a vehicle.

 

When servicing use only identical replacement parts.

 

Use  of  any  other  parts  may  create  a  hazard  or  cause 
product damage.

 

ONLy use cold water.

 

Make sure minimum clearance 

of 3 feet is maintained 

from combustible materials.

 

Never spray close to the surface t

o be cleaned as you 

can damage the surface.

 

Do not use the spring clip 

for support of human weight, 

playground equipment, or athletic or overhead lifting of 
a load. Holds up to 5 lbs.

 

Save these instructions.

 Refer to them frequently and 

use them to instruct other users. If you loan someone this 
tool, loan them these instructions also.

Summary of Contents for PS80903A

















































Reviews: