37
Step 6
When the installation is complete, carefully check and ensure all the screws and nuts are fastened firmly.
Step 7: assembling the adaptor
The adaptor must be connected to the back of the device.
MAINTENANCE AND USE
This device requires a regular check-up to prevent physical injury. This means that bolts and nuts should be
frequently checked for cracks and sharp edges etc.
Defective components must be replaced immediately. If this is not possible, the device must be put out of
order until the necessary repairs have been made.
Clean only with a damp cloth, do not use solvent cleaners.
This product is intended for use in clean, dry conditions. You should avoid storage in excessively cold or
damp places as this may lead to corrosion and other related problems.
COMPUTER
Turn computer on
Once the 9-volt adaptor is connected, the computer comes on and a tone sounds.
Attention:
if the computer does not receive a signal for more than 4 minutes, the computer will automatically
switch to sleeping mode. Press a key or move the pedals to start the computer.
Summary of Contents for FET8319P
Page 2: ...Inhoud Nederlands 3 Deutch 16 English 29 Fran ais 44 e tina 57...
Page 18: ...18 DAS PRODUKT...
Page 32: ...32 THE PRODUCT...
Page 59: ...59 PRODUKT...