PowerPeak FET8319P, Manual, Page: 33 / 69

33
PARTS LIST
No.
Description Qty No. Description Qty
1 Computer 1 49 Carriage bolt 2
2 Hand pulse sensor 2 50 Conducting wire 1
3 Handlebar 1 51 Flywheel 1
4 Hand pulse cable 2 52 Belt 1
5 End cap handlebar 2 53 Belt adjustment 1
6 Self-tapping screw 2 54 Screw 2
7 Computer cover 1 55 Cover axle 2
8 Screw 2 56 Allen bolt 2
9 Handlebar sponge 2 57 Bushing 4
10 End cap handle 2 58 Cover crank 2
11 Handlebar sponge 2 59 Round cover 2
12 Moving handle (L/R) 1/1 60 Large cover (L/R) 1/1
13 Curved washer 14 61 Screw 8
14 Allen bolt 10 62 Screw 2
15 Spring washer 14 63 Cross 2
16 Self-tapping screw 4 64 Washer 8
17 Allen bolt 6 65 Self-tapping screw 8
18
Washer 2
66
C-shaped clip 2
19 Nylon bushing 4 67 Washer 2
20 Cover moving handle 4 68 Main frame 1
21 Tube moving handle (L/R) 1/1 69 DC cable 1
22 Self-tapping screw 6 70 Washer 2
23 Curved washer 2 71 Sensor base 1
24 Cover handlebar post 2 72 Sensor 1
25 Handlebar post 1 73 Self-tapping screw 1
26 Nylon bushing 2 74 Bearing 4
27 Rotation axle 1 75 Bushing 1
28 Upper hand pulse cable 1 76 Washer 2
29 Bushing 4 77 Washer for pedal 4
30 Axle 2 78 Spring washer 4
31 Lower cover moving handle 2 79 Knob 4
32 Self-tapping screw 7 80 Curved washer 1
33 Cover pedal tube (L/R) 1/1 81 Belt wheel 1
34 Screw 8 82 Round metal plate 1
35 Allen bolt 2 83 Allen bolt 4
36 Pedal tube (L/R) 1/1 84 Plastic cover 2
37 Plastic cover 1 85 Screw 2
38 Cover front stabiliser 2 86 M-shaped part 2
39 Front stabiliser 1 87 Washer 2
40 Nylon nut 3 88 Nylon nut 2
41 Washer 2 89 Nylon bushing 4
42 End cap pedal tube 2 90 Washer 2
43 Carriage bolt 4 91 Cover rear stabiliser 2
44 Pedal (L/R) 1/1 92 Rear stabiliser 1
45 Lower hand pulse cable 1 93 Allen wrench 2
46 Screw 6 94 Wrench 1
47 Motor 1 95 Adaptor 1
48 Cap nut 2
Attention
Some of the above parts have already been assembled to the main body. These are not delivered separately!
ASSEMBLY
In order to familiarise yourself with the parts of the device, we advise you to study the overview picture and
the parts list carefully before you start assembly. Place all the parts on the floor and remove all packaging
materials.