Telecoms Power Solutions
FatBox Modem
5
© PowerOasis 2012
SmartHub Installation Guide
88-00060-1
November 9, 2012
1 INTRODUCTION
1.1 Scope of the Document
This document details the setup of either the FATBOX GPRSV2 or the FATBOX BASE
(HSUPA) Modems for use with the SmartHub.
Both models of FATBOX Modem can be configured for use as either a GPRS Modem or as
an SMS Modem.
1.2 Fatbox GPRSV2 Cellular Router
Connect mobile or remote Ethernet devices to the internet via stable GPRS (and EDGE) data
networks. FATBOX GPRSV2 router allows simultaneous serial port transparent connection to
a remote server and Ethernet port TCP/IP operations or operate as a serial modem. For out
of band management of equipment in data-centers. FATBOX GPRSV2 router supports two
data SIM cards to provide redundant GPRS connection for critical mobile or remote
applications.
•
EDGE Class 10 with RS-485 port version
•
-48VDC version for telecoms data center and exchanges
•
Global GPRS Class 10 850,900,1800,1900
•
Global EDGE Class 10 850,900,1800,1900 (EDGE version)
•
Dual SIM support for redundancy
•
Router mode Ethernet LAN port
•
Modem and DTU modem Serial port
•
Wake-On-LAN/RING/Serial Data
•
DMZ, Port Forwarding, Static Route
•
PPTP, L2TP and IPSEC VPN client
•
AToverETH to send AT commands (e.g. to SMS) for EDGE version
•
EGDE version - SMS to reboot router function
•
EDGE version - SSH (version 2) for secure configuration
•
Browser or TELNET configurationn
•
-10C~60C operating temperature
•
Wide 9~30VDC power supply input
•
Integrates Motorola GPRS/EDGE G24 module
•
CE and FCC tested and certified
