background image

7 - ENG

ONE YEAR LIMITED WARRANTY:

Powermate Corporation (the Company) warrants that for a period of twelve (12)

months from the date of purchase, it will replace or repair, free of charge, for the original retail purchaser only, any
part or parts, manufactured by the Company, found upon examination by the Company or its assigned representa-
tives, to be defective in material or workmanship or both. All transportation charges for parts submitted for replace-
ment or repair under this warranty must be borne by the original retail purchaser. This is the exclusive remedy under
this warranty.

Failure by the original retail purchaser to install, maintain and operate said equipment in accordance with good indus-
try practices, or failure to comply with the specific recommendations of the Company set forth in the owner’s manu-
al, shall render this warranty null and void. The Company shall not be liable for any repairs, replacements, or adjust-
ments to the equipment or any costs for labor performed by the purchaser without the Company’s prior written
approval. The effects of corrosion, erosion and normal wear and tear are specifically excluded from this warranty.

THE COMPANY MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER,
EXPRESSED OR IMPLIED EXCEPT THAT OF TITLE. ALL IMPLIED WARRANTIES, INCLUDING ANY WARRAN-
TY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIABIL-
ITY FOR CONSEQUENTIAL AND INCIDENTAL DAMAGES UNDER ANY AND ALL WARRANTIES, OTHER CON-
TRACTS, NEGLIGENCE, OR OTHER SORTS IS EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY
LAW.

Notwithstanding the above, any legal claim against the Company shall be barred if legal action thereon is not com-
menced within twenty-four (24) months from the date of purchase or delivery whichever occurs last. This warranty
constitutes the entire agreement between the Company and the original retail purchaser and no representative or
agent is authorized to alter the terms of same without expressed written consent of the Company.

LIMITED W

LIMITED W

ARRANTY

ARRANTY

Powermate Corporation

4970 Airport Road

P.O. Box 6001

Kearney, NE  68848

1-308-237-2181

Fax  1-308-234-4187

Manufactured in Taiwan for / Fabriqué à Taiwan pour / Fabricado en Taiwan para

Powermate Corporation, Aurora, IL 60504

© 2005 Powermate Corporation

All Rights Reserved. Tous droits réservés. Reservados todos los derechos.

Coleman® and             are registered trademarks of The Coleman Company, Inc. used under license.

Coleman® et             sont des marques déposées de The Coleman Company, Inc. utilisées sous licence.

Coleman® y            son marcas comerciales registradas de The Coleman Company, Inc. utilizadas bajo licencia.

Powermate® is a registered trademark of Powermate Corporation.

Powermate® est une marque déposée de Powermate Corporation.

Powermate® es una marca comercial registrada de Powermate Corporation.

Summary of Contents for 010-0018CT




















Reviews: