PowerLogic EGX200, Instruction Bulletin

Page: 42 / 56

38 © 2001 Schneider Electric All Rights Reserved
Chapter 5—Operation 63230-314-200/A2
EGX200 Embedded Web Page Options 8/2001
Advanced Setup
The Advanced Setup page (Figure 5–8) is accessible by the administrator password
only. This page allows administrator level users to change EGX200 timing values that
normally should not be changed. Also, you can use this page to set the EGX200 on-
board clock. EGX200 parameters and corresponding values are shown in Table 5–5.
Figure 5–8: EGX200 Advanced Setup page
Logging Out
To log out of the EGX200 configuration session, click Home to return to the EGX200
Home page. Click Log Out to end your session.
Table 5–5: Advanced communication setup parameters
Parameter Range of Values Description Default
User Timeout 1 to 255 minutes
Maximum idle time allowed before the EGX200
ends a user's access to the web pages
10
Timeout for COM
Ports
3 to 10 seconds
Maximum time the EGX200 waits for requested
information from RS-485 daisy-chained devices
5
Number of
Viewable Devices
2 to 96 devices Number of viewable devices in the Device List 16
Default Language English, French, Spanish The language to be displayed as the default English
Set Time Current time and date of the EGX200